Remove Transmission Mount Member: Notes

1. Remove in the order indicated in the table.

Fig 1: Transmission Mount Member Components Location With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

TIGHTENING TORQUE SPECIFICATIONS

Step	Part name
32	Dust boot (See DUST BOOT REMOVAL NOTE )	-	-
33	Bolt	Replacement part	29 N.m {2.95 kgf.m 21.4 ft.lbf}
34	Intermediate shaft	-	-
35	Bolt (See BOLT REMOVAL NOTE )	-	11 N.m {110 kgf.cm, 95 in.lbf}
36	Wiring harness clip	-	-
37	Nut	-	19 N.m {1.95 kgf.m, 14.1 ft.lbf}
38	Bolt	-	56.5 N.m {5.75 kgf.m, 41.55 ft.lbf}
39	Transmission mount member	-	-