DTC P0A92-00: Drive Motor Control Module: Torque Error

P0A92: 00 (SGC2/DMCM (WITH MAZDA M HYBRID BOOST)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Drive motor control module: Torque error
Detection condition	The drive motor control module detects that the value obtained by subtracting the estimated torque value from the torque command value is standard value or more.
Fail-safe	Not applicable
Possible cause	Drive motor control module malfunction (Refer to [INVERTER REMOVAL/INSTALLATION ] in service information).
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable