DTC P06B8-00: Internal Control Module Non-Volatile Ram Error

WARNING: This page is about a different variant/trim than selected.

P06B8: 00 (PCM (PYUL)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Internal control module non-volatile RAM error
Detection condition	PCM internal EEPROM malfunction.
Fail-safe	Inhibits engine-stop by i-stop control.
Possible cause	PCM connector or terminal malfunction (See CONNECTOR INSPECTION .) PCM internal malfunction (Refer to [PCM REMOVAL/INSTALLATION ] in service information).
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System Wiring Diagram	Not applicable