LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Seats) >> Seat Warmer Control Unit Removal/Installation >> Without Position Memory System

Without Position Memory System

WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the head restraint.
  2. Remove the front seat installation bolts. (See FRONT SEAT REMOVAL/INSTALLATION .)
  3. Remove the front seat belt lower anchor. (See FRONT SEAT BELT REMOVAL/INSTALLATION .)
  4. Perform the following procedure.
    1. Switch the ignition off.
    2. Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  5. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION .)
  6. Disconnect the seat warmer control unit connector.
    G16376371Courtesy of MAZDA MOTORS CORP.
  7. Remove the screws.
  8. Remove the seat warmer control unit.
  9. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals