LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Electric Power Steering System) >> Steering Wheel And Column Removal/Installation >> Steering Column Component Removal Note

Steering Column Component Removal Note

WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Always lock the adjuster lever. Otherwise, the steering column component could be damaged. In addition, do not release the lock of the adjuster lever until the steering column component installation is completed.
  • When removing the steering column component, follow the procedure. Otherwise, it could damage the intermediate shaft.
  1. Lock the adjuster lever.
    G16375443Courtesy of MAZDA MOTORS CORP.
  2. Place alignment marks on the steering gear (pinion) and intermediate shaft as shown in the figure.
    G16375444Courtesy of MAZDA MOTORS CORP.
  3. Remove the joint bolt.
  4. Disconnect the intermediate shaft from the steering gear (pinion).
  5. Remove the nuts, then remove the steering column component from the dashboard member.
scientia non olet · About LEMON Manuals