Front Lower Arm Bushing Installation Note

1. Apply soapy water to the front lower arm bushing.
2. Install the front lower arm bushing using the SSTs and the press.
   CAUTION:

   • Finish positioning the bushing before the soapy water dries.

   Courtesy of MAZDA MOTORS CORP.

   NOTE:

   • If soapy water gets in the inner pipe of the front lower arm bushing, always wipe it off using a cloth.
3. Using a vernier caliper and steel plate, verify that the front lower arm bushing is installed to the position shown in the figure below.

Courtesy of MAZDA MOTORS CORP.

W: 5.6±0.8 mm {0.22±0.03 in}