Cable Outer End (Transaxle Side) Installation Note
WARNING: This page is about a different car, the 2025 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the selector cable bracket tabs are not deformed.
- If the selector cable bracket tabs are deformed, replace them with new ones. (See (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [FW6AX-EL] .) (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [GW6AX-EL (VIN Y)] .)
- Assemble the cable outer end (transaxle side) to the selector cable bracket so that the marking is in the area of the arrow shown in the figure below.