PID/data monitor inspection

Using the PID/data monitor function of the M-MDS, select PID [ENG_OIL_LVL]. (Refer to PID/DATA MONITOR INSPECTION in the appropriate troubleshooting information )
Verify the engine oil level with PID [ENG_OIL_LVL].

Measure the engine oil level using an oil level gauge.

Engine oil level (Reference)

ENGINE OIL LEVEL SPECIFICATIONS

Oil level gauge position
Lower limit position	Upper limit position
Approx. 54 mm {2.1 in}	Approx. 68 mm {2.7 in}

G16707121

Courtesy of MAZDA MOTORS CORP.

COMPONENT OPERATIONS

Component No	Refer to
1	Lower limit position
2	Upper limit position

Verify that the engine oil level indicated on the M-MDS and the engine oil level measured with the oil level gauge match.
- If a match cannot be verified, replace the engine oil level sensor. (See ENGINE OIL LEVEL SENSOR REMOVAL/INSTALLATION [H3T] ).