LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 PHEV Preferred >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Security And Locks) >> Liftgate Opener Switch Inspection

Liftgate Opener Switch Inspection

WARNING: This page is about a different car, the 2025 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION .)
    4. Power liftgate (PLG) rear switch (with power liftgate) (See POWER LIFTGATE (PLG) REAR SWITCH REMOVAL/INSTALLATION .)
    5. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    6. Liftgate garnish (See LIFTGATE GARNISH REMOVAL/INSTALLATION .)
    7. Rear finisher (See REAR FINISHER REMOVAL/INSTALLATION .)
    8. Liftgate opener switch (See LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION .)
  3. Verify the continuity of liftgate opener switch terminals A and B.
G15642312Courtesy of MAZDA MOTORS CORP.
G15642313Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals