LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-90 PHEV Preferred >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Control System (VIN M)) >> Engine Oil Level Sensor Inspection (VIN M) >> PID/DATA Monitor Inspection

PID/DATA Monitor Inspection

WARNING: This page is about a different car, the 2025 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that there is no engine oil leakage.
    • If there is any malfunction, repair or replace the malfunctioning part according to the inspection results.
  2. Inspect the engine oil level. (See ENGINE OIL LEVEL INSPECTION (VIN M) .)
  3. Connect the M-MDS to the DLC-2.
  4. Switch the ignition ON (engine off).
  5. Access the PID/DATA monitor item EOL using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST [PCM (VIN M)] .)
  6. Verify that the PID EOL value and the engine oil amount measured using the dipstick are same.
scientia non olet · About LEMON Manuals