DTC U1081-88: Module Communication Error (Can Bus No. 11)
U1081:88 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location | Unit communication error (CAN bus No. 11) | |
|---|---|---|
| Detection condition |
|
|
| Fail-safe |
|
|
| Vehicle status when DTCs are output | Not applicable | |
| Repeatability verification procedure | 1. Clear the DTC recorded in the memory. (See CLEARING DTC .) | |
| Inspection/action procedure | Proceed with the inspection/action in the order from Step 1 below. After part repair or replacement, perform the repeatability verification procedure and perform a DTC inspection. (See DTC INSPECTION .) If the DTC inspection indicates the same DTC again, go to the next step. 1. Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. |
|
| Purpose/reason (possible cause) | CAN bus communication line malfunction | |
| Referred to service information item | MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)] | |
| System wiring diagram |
|
|
| Function explanation (DTC detection outline) | Not applicable | |