Diagnostic Procedure
WARNING: This page is about a different car, the 2024 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC U3003:17 (POWER LIFTGATE CONTROL MODULE) DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | VERIFY PCM DTCs
|
Yes | Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [PCM (VIN Y)] .) (See DTC TABLE [PCM (VIN L)] .) (See DTC TABLE [PCM (VIN M)] .) |
| No | Go to the next step. | ||
| 2 | INSPECT BATTERY
|
Yes | Go to the next step. |
| No | Replace the battery, then go to Step 4. (See BATTERY REMOVAL/INSTALLATION [VIN Y] .) (See BATTERY REMOVAL/INSTALLATION [VIN L] .) (See BATTERY REMOVAL/INSTALLATION [VIN M] .) |
||
| 3 | INSPECT GENERATOR
|
Yes | Go to the next step. |
| No | Replace the generator, then go to the next step. (See GENERATOR REMOVAL/INSTALLATION [VIN Y] .) (See GENERATOR REMOVAL/INSTALLATION [VIN L] .) (See GENERATOR REMOVAL/INSTALLATION [VIN M] .) |
||
| 4 | VERIFY THAT REPAIRS HAVE BEEN COMPLETED
|
Yes | Repeat the inspection from Step 1.
|
| No | Go to the next step. | ||
| 5 | VERIFY IF OTHER DTCs DISPLAYED
|
Yes | Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [POWER LIFTGATE (PLG) CONTROL MODULE] .) |
| No | DTC troubleshooting completed. | ||