DTC U2300:54 [Power Liftgate (PLG) Control Module]: Notes
WARNING: This page is about a different car, the 2024 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC U2300:54 (POWER LIFTGATE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Configuration data not received from instrument cluster |
| Detection condition |
- The power liftgate (PLG) control module cannot receive configuration data from the instrument cluster with the ignition switched ON (engine off or on).
|
| Fail-safe |
- Stops the power liftgate (PLG) system operation.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the power liftgate (PLG) control module to the power liftgate (PLG) control module, 30s or more need to have elapsed since the ignition was switched ON (engine off or on).
- DTCs are stored in the instrument cluster.
- Instrument cluster configuration not implemented
- Instrument cluster internal memory malfunction
- Instrument cluster configuration data error
- Power liftgate (PLG) control module malfunction
|
| System wiring diagram |
Not applicable |