Keyless Antenna Inspection
NOTE:
- The integrity of the keyless antenna cannot be determined from a single part. When inspecting the keyless antenna, perform the following procedure.
- Open any door.
- Close all the doors (front door, rear door) and the liftgate.
- Ignition is switched from ON (engine off or on) to OFF.
- Connect the M-MDS to the DLC-2.
- Perform the DTC inspection for the body control module (BCM) and verify if any DTCs related to the keyless antenna is detected. (See DTC INSPECTION
.)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [BODY CONTROL MODULE (BCM)] .)