DTC U2505-82: Error Signal Received From Driver Monitoring Camera Unit

U2505: 82 (VCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from driver monitoring camera unit
Detection condition	The vehicle control module (VCM) receives an error signal from the driver monitoring camera unit.
Fail-safe	(See DTC TABLE [VCM] .)
Possible cause	Internal malfunction related DTCs are stored in the following modules. Vehicle control module (VCM) (See DTC TABLE [VCM] .) Body control module (BCM) (See DTC TABLE [BCM] .) DTCs are stored in the driver monitoring camera unit. (See DTC TABLE [DMC] .) Driver monitoring camera unit malfunction (Refer to applicable DRIVER MONITORING CAMERA UNIT REMOVAL/INSTALLATION in workshop manual.) Vehicle control module (VCM) malfunction (built into body control module (BCM)) (Refer to applicable BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in workshop manual.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (see CLEARING DTC .)
System wiring diagram	Not applicable