LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> CX-30 Preferred >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Notification And Warning Speaker Removal/Installation >> Rear >> Notes

Notification And Warning Speaker Removal/Installation: Rear: Notes

  1. Switch the ignition ON (engine off or on).
  2. Open the front driver-side door.
  3. Switch the ignition off.
  4. Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  5. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION .)
    4. Door lock switch (liftgate) (with door lock switch (liftgate)) (See DOOR LOCK SWITCH REMOVAL/INSTALLATION .)
    5. Power liftgate (PLG) rear switch (with power liftgate (PLG) rear switch) (See POWER LIFTGATE (PLG) REAR SWITCH REMOVAL/INSTALLATION .)
    6. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    7. Rear wiper arm and blade (See REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    8. Rear wiper motor (See REAR WIPER MOTOR REMOVAL/INSTALLATION .)
  6. Remove the bolts. (See BOLT INSTALLATION NOTE .)
    Fig 1: Notification And Warning Speaker Bolts With Torque Specification
    G16377398Courtesy of MAZDA MOTORS CORP.
  7. Remove the notification and warning speaker (rear).
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals