DTC B10AD-86: Error Signal Received From Humidity Sensor/Solar Radiation Sensor/Auto Light Sensor/Rain Sensor (BCM)
B10AD:86 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from humidity sensor/solar radiation sensor/auto light sensor/rain sensor |
| Detection condition |
- The body control module (BCM) receives the error signals from the humidity sensor/solar radiation sensor/auto light sensor/rain sensor.
Precondition
- The windshield wiper switch is in the AUTO position.
|
| Fail-safe |
- Control is continued at the normal value right before malfunction.
|
| Possible cause |
- Humidity sensor/solar radiation sensor/auto light sensor/rain sensor malfunction (Refer to RAIN SENSOR INSPECTION
in the service information.)
- Body control module (BCM) malfunction (Refer to applicable BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
in the service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
- Operate the windshield wiper switch to AUTO position.
|
| System wiring diagram |
|