Notification And Warning Amplifier Inspection
NOTE:
- The integrity of the notification and warning amplifier cannot be determined from a single part. When inspecting the notification and warning amplifier, perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the DTC inspection for the notification and warning amplifier and verify if any DTCs related to the notification and warning amplifier is detected. (Refer to
DTC INSPECTION
in the service information)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to [DTC TABLE [ISB_AMP] ] in the service information)