DTC U0452-68: Error Signal Received From SAS Control Module

U0452-68: (DSC) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from SAS control module
Detection condition	The electronically controlled brake unit/DSC HU/CM receives the error signal from the SAS control module.
Fail-safe	(See DTC TABLE [DSC] .)
Possible cause	DTCs are stored in the SAS control module. (See DTC TABLE [SAS] .) SAS control module malfunction (Refer to SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA/ISRAEL SPEC.] in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable