LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> 3 S >> Repair and Diagnosis >> Brakes >> Traction Control >> On-Board Diagnostics [Dynamic Stability Control] (2 Of 2) >> DTC U0300-51: Internal Control Module Software Incompatibility

DTC U0300-51: Internal Control Module Software Incompatibility

U0300-51: (DSC) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Internal control module software incompatibility
Detection condition
  • The electronically controlled brake unit/DSC HU/CM detects that software incompatible with the hardware specification was written.
Fail-safe (See DTC TABLE [DSC] .)
Possible cause
  1. Electronically controlled brake unit/DSC HU/CM malfunction (writing of software incompatible with hardware specification for electronically controlled brake unit/DSC HU/CM implemented) (Refer to [ELECTRONICALLY CONTROLLED BRAKE UNIT REMOVAL/INSTALLATION] in service information.) (Refer to DSC HU/CM REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure
  1. Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram
  • Not applicable