Vehicle status monitor
- Displays the vehicle status monitor information.
Vehicle Status Monitor verification procedure
- Select the "Information" button on the Home screen.
- Select [Vehicle Status Monitor] on the information screen to display the warning guidance.
- The buttons on the menu screen operate as follows:VEHICLE STATUS MONITOR VERIFICATION PROCEDURE
Item Explanation Serious malfunction(s) (1) Displayed if there is a serious problem. Important notice(s) (1) Displayed if there is recall information. Vehicle warning messages If there is a problem with the vehicle, information about the problem is displayed. Next service The next maintenance period is displayed.
Date- The date manually set by the customer is displayed.
Distance- If "Next Service Date" is set to "Automatic"
- The "Distance Until Oil Change" content is displayed.
- If "Next Service Date" is set to "Manual"
- The traveled distance manually set by the customer is displayed.
However, when any of the following conditions is met, the "Distance Until Oil Change" content is displayed.- You have not set the traveled distance.
- "Distance Until Oil Change" is shorter than the traveled distance set by the customer
(Electric Vehicles)- The travelled distance manually set by the customer is displayed.
Engine oil level (1) The current engine oil level can be measured. Maintenance details Engine oil temperature (1) The engine oil temperature is displayed. Distance until oil change The traveled distance until engine oil needs to be replaced is displayed. Next service The next maintenance period manually set by the customer is displayed Tire pressure monitor The current tire pressure can be checked. - When tire pressures were last modified
- Air pressure of each tire
- Condition of each tire
- When air pressure is low: Yellow color
- When air pressure is correct: Blue color
- When air pressure cannot be monitored: Black color
- Tire pressure units
Battery health (1) The maximum capacity of the drive battery is displayed. Vehicle maintenance settings Next service date The method of setting the next maintenance can be selected from the following. - Automatic
- Manual
Set next service date If "Next Service Date" is set to "Manual", the next maintenance date can be set. Set next service distance If "Next Service Date" is set to "Manual", the traveled distance until the next maintenance period can be set. Reset oil change distance The "Distance Until Oil Change" content can be reset. After replacing the engine oil, perform the reset (engine oil data resetting) of the recorded value in this item. Reset service interval The "Next Service" date and distance are reset. (1) Some models.
- The buttons on the menu screen operate as follows: