Details On DTCs
U2300-55: (ALH/AFS/ALV) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Configuration error (no configuration) |
| Detection condition |
Determination conditions |
- The auto leveling control module/adaptive front lighting system (AFS) control module/adaptive LED headlights control module received a signal which indicates the body control module (BCM) configuration is not performed.
|
| Preconditions |
|
| Malfunction determination period |
|
| Fail-safe |
- The headlight leveling actuator is stopped at the position when the malfunction is determined.
- Perform the following controls with the adaptive LED headlights turned on. (with adaptive LED headlights)
- Turn off glare-free high beam.
- Set wide-range low beam as basic light distribution.
|
| Vehicle status when DTCs are output |
|
| Possible cause |
- Inappropriate previous module replacement procedure
- Configuration data writing error
- DTCs are stored in the body control module (BCM).
- Body control module (BCM) malfunction
- Auto leveling control module/adaptive front lighting system (AFS) control module/adaptive LED headlights control module malfunction
|