DTC B14F7-54: Configuration Data Of Body Control Module (BCM) Not Received

B14F7-54: (VCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Configuration data of body control module (BCM) not received
Detection condition	The vehicle control module (VCM) detects that the 360°view monitor control module/parking assist unit (optical) determined that the 360°view monitor system aiming is not completed.
Fail-safe	(See DTC TABLE [VCM] .)
Possible cause	Internal malfunction related DTCs are stored in the following modules. Vehicle control module (VCM) (See DTC TABLE [VCM] .) Body control module (BCM) (See DTC TABLE [BCM] .) DTCs are stored in the 360°view monitor control module/parking assist unit (optical). (See DTC TABLE [VMC] .) 360°view monitor system aiming is not performed. (See 360°VIEW MONITOR SYSTEM AIMING .) 360°view monitor control module/parking assist unit (optical) malfunction (Refer to PARKING ASSIST UNIT (OPTICAL) REMOVAL/INSTALLATION in service information.) (Refer to 360DEGREESVIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION in service information.) Vehicle control module (VCM) malfunction (built into body control module (BCM)) (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable