DTC B10AD-95: Improper Assembly Of Humidity Sensor/Solar Radiation Sensor/Auto Light Sensor/Rain Sensor
B10AD-95: (BCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Improper assembly of humidity sensor/solar radiation sensor/auto light sensor/rain sensor |
| Detection condition |
- Destination information recorded in humidity sensor/solar radiation sensor/auto light sensor/rain sensor and destination information input by performing configuration are incompatible.
|
| Fail-safe |
|
| Possible cause |
- Body control module (BCM) configuration is not completed. (See
CONFIGURATION.)
- Improper assembly of humidity sensor/solar radiation sensor/auto light sensor/rain sensor (Part with different part number is installed.) (Refer to RAIN SENSOR REMOVAL/INSTALLATION
in service information.)
- Humidity sensor/solar radiation sensor/auto light sensor/rain sensor malfunction (Refer to RAIN SENSOR INSPECTION
in service information.)
- Body control module (BCM) malfunction (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
in service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See
CLEARING DTC
.)
|
| System wiring diagram |
|