LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2023 >> CX-50 S Select >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Introduction >> Tester Usage History >> Displaying Tester Usage History For Vehicle Connected To M-MDS

Displaying Tester Usage History For Vehicle Connected To M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off or on).
  3. Perform the following procedure using the M-MDS.
    1. Press [Start] for the vehicle identification.
    2. Press the [Toolbox] tab.
    3. Press the [Diagnosis] icon or the [Work Support] icon.
    4. Press [Run] for Tester usage history.
  4. Verify the tester usage history according to the directions on the screen.
scientia non olet · About LEMON Manuals