WIRELESS CHARGER (Qi) INSPECTION
NOTE:
- The integrity of the wireless charger (Qi) cannot be determined by a single unit inspection. When inspecting the wireless charger (Qi), perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the wireless charger (Qi) DTC inspection and verify if DTCs related to the wireless charger (Qi) are detected. (Refer to the [
DTC INSPECTION [WIRELESS CHARGER (Qi)]] in the appropriate service information)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (Refer to the [DTC TABLE [WIRELESS CHARGER (QI)] ] in the appropriate service information)