Section 4 (Engine Control System (VIN M))
WARNING: This page is about a different variant/trim than selected.
- Accelerator Pedal Position (App) Sensor Inspection
- Accelerator Pedal Position (App) Sensor Removal/Installation
- Air Fuel Ratio (A/F) Sensor Inspection
- Air Fuel Ratio (A/F) Sensor Removal/Installation
- Barometric Pressure (BARO) Sensor Inspection
- Barometric Pressure (BARO) Sensor Removal/Installation
- Camshaft Position (CMP) Sensor Inspection
- Camshaft Position (CMP) Sensor Removal/Installation
- Control System Diagram
- Control System Location Index
- Coolant Control Valve Position Sensor Inspection
- Coolant Control Valve Position Sensor Removal/Installation
- Crankshaft Position (CKP) Sensor Inspection
- Crankshaft Position (CKP) Sensor Removal/Installation
- Engine Coolant Temperature (ECT) Sensor Inspection
- Engine Coolant Temperature (ECT) Sensor Removal/Installation
- Engine Oil Data Reset
- Engine Oil Level Sensor Inspection
- Engine Oil Level Sensor Removal/Installation
- Engine Oil Pressure Sensor Inspection
- Engine Oil Temperature Sensor Inspection
- Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation
- Exhaust Shutter Valve Position Sensor Inspection
- Exhaust Shutter Valve Position Sensor Removal/Installation
- Fuel Pressure Sensor Inspection
- Fuel Pressure Sensor Removal/Installation
- Fuel Tank Pressure Sensor Inspection
- Fuel Tank Pressure Sensor Removal/Installation
- Heated Oxygen Sensor (Ho2S) Inspection
- Heated Oxygen Sensor (Ho2S) Removal/Installation
- Intake Air Temperature (IAT) Sensor Inspection
- Ion Sensor Inspection
- Ion Sensor Removal/Installation
- Knock Sensor (KS) Inspection
- Knock Sensor (KS) Removal/Installation
- Manifold Absolute Pressure (Map) Sensor Inspection
- Manifold Absolute Pressure (Map) Sensor/Intake Air Temperature (IAT) Sensor No. 2 Removal/Installation
- Mass Air Flow (MAF) Sensor Inspection
- Mass Air Flow (MAF) Sensor/Intake Air Temperature (IAT) Sensor No. 1 Removal/Installation
- Pcm Configuration (Using As-Built Data)
- Pcm Configuration (Using Read/Write Function)
- Pcm Inspection
- Without Using the M-MDS
- Inspection Using An Oscilloscope (Reference)
- Electric variable valve timing motor (rotation direction) signal
- Electric variable valve timing motor (rotation pulse) signal
- Exhaust CMP signal
- Intake CMP signal
- CKP signal
- Electric variable valve timing driver (diagnostic) signal
- Generator output voltage
- Purge control
- IGT1, IGT2, IGT3, IGT4 control
- Hydraulic variable valve timing control signal
- Engine oil control signal
- Electric variable valve timing control signal
- Generator field coil control signal
- A/F sensor heater control signal
- Drive-by-wire control (+) signal
- Fuel injection control (-) signal
- Fuel injection control (+) signal
- High pressure fuel pump control (+) signal
- High pressure fuel pump control (-) signal
- HO2S heater control signal
- Fuel pump control signal
- Fuel pump control module (diagnostic) signal
- Using The M-MDS
- Pcm Removal/Installation
- Throttle Position (TP) Sensor Inspection
- Throttle Position (TP) Sensor Removal/Installation