LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2023 >> 3 Select, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control - Service Information >> DSC HU/Control Module REMOVAL/INSTALLATION [L.H.D. (US)] >> Step 2 >> Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC HU/Control Module.
    G13176281Courtesy of MAZDA MOTORS CORP.
  2. Apply protective tape to the connector to prevent brake fluid from entering.
  3. Disconnect the brake pipes.
scientia non olet · About LEMON Manuals