Manual Open/Close Function Inspection

MANUAL OPEN/CLOSE FUNCTION INSPECTION DESCRIPTION

STEP	INSPECTION		ACTION
1	Switch the ignition ON (engine off or on). Operate the power window using the manual open/close function on the power window main switch. Does the power window operate properly?	Yes	Go to the next step.
1		No	Inspect the power window main switch, power window motor and the wiring harness. (See POWER WINDOW MAIN SWITCH INSPECTION .) (See POWER WINDOW MOTOR INSPECTION .) Repair or replace malfunctioning parts. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .) (See POWER WINDOW REGULATOR DISASSEMBLY/ASSEMBLY .)
2	Operate the power window using the manual open/close function on the power window sub switch. Does the power window operate properly?	Yes	Go to the next step.
2		No	Inspect the power window sub switch and the wiring harness. (See POWER WINDOW SUBSWITCH INSPECTION .) Repair or replace malfunctioning parts. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
3	Turn the power-cut switch off (contact point: closed). Does the door glass other than driver's door glass operate?	Yes	There is a malfunction in the power-cut switch. Replace the power window main switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)
3		No	Manual open/close function is normal. Perform the auto open function inspection. (See AUTO OPEN FUNCTION INSPECTION .)