LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> MX-5 Miata Club >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Engine Mount Disassembly/Assembly >> Engine Mount (RH) >> Notes

Engine Mount (RH): Notes

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the bolt shown in the illustration and set the ground cable aside.
    Fig 1: Ground Cable Bolt With Torque Specification (RH)
    G14587937Courtesy of MAZDA MOTORS CORP.
  3. Remove the front wheels and tires (RH). (See GENERAL PROCEDURES (SUSPENSION) .)
  4. Remove the fasteners shown in the illustration and slightly bend back the front mudguard No. 2 (RH).
    G14587938Courtesy of MAZDA MOTORS CORP.
  5. Remove the front splash shield No. 1 (RH). (See FRONT SPLASH SHIELD No. 1 REMOVAL/INSTALLATION .)
  6. Remove the front crossmember under cover. (See FRONT CROSSMEMBER UNDER COVER REMOVAL/INSTALLATION .)
  7. Remove in the order indicated in the table.
  8. Install in the reverse order of removal.
Fig 2: Engine Mount Components With Torque Specification (RH)
G14587939Courtesy of MAZDA MOTORS CORP.
PART DESCRIPTION

Component no. Refer to
1 Engine mount rubber (RH)
See ENGINE MOUNT RUBBER (RH) REMOVAL NOTE .)
(See ENGINE MOUNT RUBBER (RH) INSTALLATION NOTE .)
2 Engine mount bracket (RH)
scientia non olet · About LEMON Manuals