Start Stop Unit Inspection: Notes

NOTE:

Terminals with terminal voltage that cannot be measured are not indicated in the terminal voltage table (reference).

Remove the Column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).

If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.

If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the start stop unit. (See START STOP UNIT REMOVAL/INSTALLATION .)