Setting Method By Operation Of Remote Transmitter Button

The following setting can be changed by operation of the remote transmitter button.

Function

Initial setting

Setting content

Control unit

2-step unlocking function.⁽¹⁾

ON

OFF/ON

Start stop unit

⁽¹⁾	With 2-step unlocking function.

Change the setting for the 2-step unlocking function referring to the following procedure:
NOTE:
- If any of the following conditions is met during procedure, the setting for changing the 2-step unlocking function is finished.
- The ignition is switched to ACC or ON (engine off or on).
- The driver's door is closed.
- The trunk lid is open.
- The remote transmitter operation is not performed for approx. 10 s.
- The lock button on the remote transmitter is pressed.
- A request switch is pressed.
Courtesy of MAZDA MOTORS CORP.