LF Control Unit Inspection: Notes

Remove the scuff plate (RH). (See SCUFF PLATE REMOVAL/INSTALLATION .)
Remove the front side trim (RH). (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).

If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.

If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the LF control unit. (See LF CONTROL UNIT REMOVAL/INSTALLATION .)