Foot Support Removal/Installation

Remove the following parts:
1. Passenger-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION ).
2. Passenger-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION ).
3. Side wall (See SIDE WALL REMOVAL/INSTALLATION ).
Partially peel back the floor covering.
Remove the fastener.
Without 360° view monitor control module

Courtesy of MAZDA MOTORS CORP.

With 360° view monitor control module

Courtesy of MAZDA MOTORS CORP.
Remove the foot support in the direction of the arrow shown in the figure.
Without 360° view monitor control module

Courtesy of MAZDA MOTORS CORP.

With 360° view monitor control module

Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.