LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S Select >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Electric Power Steering System - Service Information >> EPS Control Module Inspection >> Notes

EPS Control Module Inspection: Notes

  1. Remove the driver-side front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION ).
  2. Remove the driver-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION ).
  3. Remove the lower decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION ).
  4. Remove the hood release lever. (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL/INSTALLATION ).
  5. Remove the fuel-filler lid opener lever. (See FUEL-FILLER LID OPENER CABLE REMOVAL/INSTALLATION ).
  6. Remove the driver-side lower panel. (See LOWER PANEL REMOVAL/INSTALLATION ).
  7. Attach the tester lead to the underside of the EPS Control Module connector and inspect the voltage according to the terminal voltage table (reference).
scientia non olet · About LEMON Manuals