LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> CX-5 S Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 320 (Lighting System) >> Hazard Warning Switch Removal/Installation

Hazard Warning Switch Removal/Installation

WARNING: This page is about a different car, the 2021 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the lower decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
  3. Remove the upper decoration panel. (See DECORATION PANEL REMOVAL/INSTALLATION .)
  4. While pressing the hazard warning switch tabs in the direction of arrows (1) shown in the figure, press the hazard warning switch in the direction of arrow (2), and detach the hazard warning switch tabs from the upper decoration panel.
    G11428119Courtesy of MAZDA MOTORS CORP.
  5. Remove the hazard warning switch.
    G11428120Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals