Shift-lock solenoid specification
SHIFT-LOCK SOLENOID SPECIFICATION
| Terminal | Connected to | Test condition | Voltage (V) | |
|---|---|---|---|---|
| A | IG1 relay | Ignition switched ON (engine on) | B+ | |
| Except above | Below 1.0 | |||
| D | Start stop unit | Ignition switched ON (engine on) | Selector lever at P position and brake pedal depressed | Below 1.0 |
| Except above | B+ | |||
- If the voltage is not as indicated in the table, repair or replace the related wiring harness.
- If the voltage can be verified as indicated in the table, replace the selector lever component. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)