Trunk End Trim Removal/Installation: Hatchback-5HB

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trunk covering. (See TRUNK COVERING REMOVAL/INSTALLATION .)
Partially peel back the weatherstrip.

Courtesy of MAZDA MOTORS CORP.
Remove the fasteners.

Courtesy of MAZDA MOTORS CORP.
Pull the trunk end trim in the direction of the arrow in the order of (1), (2) shown in the figure while detaching tabs, clips, pins and guides.

Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.