LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Select, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrumentation/Driver Info) >> Notification And Warning Speaker Removal/Installation >> Rear (Hatchback-5HB) >> Notes

Rear (Hatchback-5HB): Notes

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate recess (See LIFTGATE RECESS REMOVAL/INSTALLATION .)
    4. Door lock switch (with door lock switch (liftgate)) (See DOOR LOCK SWITCH REMOVAL/INSTALLATION (US) .)
    5. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    6. Rear wiper arm and blade (See REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION (US) .)
    7. Rear wiper motor (See REAR WIPER MOTOR REMOVAL/INSTALLATION .)
  3. Remove the bolts. (See BOLT INSTALLATION NOTE .)
    Fig 1: Notification And Warning Speaker Bolts With Torque Specification
    G13179975Courtesy of MAZDA MOTORS CORP.
  4. Remove the notification and warning speaker (rear).
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals