LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Fuel System (VIN Y)) >> Fuel Pump Unit Removal/Installation >> Set Plate Component Removal Note

Set Plate Component Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the SST shown in the figure.
    G14579373Courtesy of MAZDA MOTORS CORP.
  2. Remove the set plate component using the SST.
scientia non olet · About LEMON Manuals