Liftgate Light Inspection (Us)
WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Remove the liftgate light from the liftgate. (See LIFTGATE LIGHT REMOVAL/INSTALLATION .)
- Apply battery positive voltage and connect the ground to the liftgate light terminals as indicated in the table below and verify that each light turns on normally.
B+ Terminal Ground Terminal Condition Back-up light Tail light A E turns ON turns OFF B E turns OFF turns ON - If each light does not turn on, replace the liftgate light. (See LIFTGATE LIGHT REMOVAL/INSTALLATION .)