LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Dynamic Stability Control (Service Information)) >> DSC HU/Control Module REMOVAL/INSTALLATION [L.H.D. (US)] >> Brake Pipe Installation Note

Brake Pipe Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks made before removal and install the brake pipe to the DSC HU/Control Module and brake pipe joint referring to the figure.
    G13558402Courtesy of MAZDA MOTORS CORP.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
scientia non olet · About LEMON Manuals