LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Mechanical System (VIN M)) >> Engine Disassembly/Assembly >> Exhaust Manifold Bracket Installation Note

Exhaust Manifold Bracket Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Temporarily tighten the exhaust manifold bracket installation bolts.
  2. Tighten the bolt in the order shown in the figure.
Fig 1: Exhaust Manifold Bracket Bolts Tightening Sequence
G13174528Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals