LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Engine Control System (VIN M)) >> Camshaft Position (CMP) Sensor Removal/Installation >> Intake CMP Sensor

Intake CMP Sensor

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Disconnect the intake CMP sensor connector.
  4. Remove the intake CMP sensor.
    Fig 1: Intake Camshaft Position Sensor Bolt With Torque Specification
    G12184569Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals