Sunroof System Initialization Procedure

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

If the following operations have been performed, the initial setting is reset, and operations except for tilt up are disabled. Therefore, performing initial setting is necessary.
- Negative battery terminal is disconnected. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Sunroof switch connector is disconnected.
- Sunroof system power supply fuse is removed.

Switch the ignition ON (engine off or on).
Press the tilt up switch continuously until the glass panel stops at the tilt up position.