LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Fuel System (VIN M)) >> Fuel Pump Unit Removal/Installation >> Set Plate Component Installation Note

Set Plate Component Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the reinforcement part of the set plate component near the pipe area of the fuel pump unit as shown in the figure and assemble.
G13175070Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals