LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Control System (VIN Y)) >> Camshaft Position (CMP) Sensor Removal/Installation >> Exhaust CMP Sensor

Exhaust CMP Sensor

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the protector.
    G13714446Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the exhaust CMP sensor connector.
  5. Remove the bolt.
    Fig 1: Exhaust Camshaft Position Sensor Bolt With Torque Specification
    G13714447Courtesy of MAZDA MOTORS CORP.
  6. Remove the exhaust CMP sensor.
  7. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals