LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Cooling System (VIN Y)) >> Radiator Removal/Installation >> Radiator Removal Note

Radiator Removal Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. To prevent damage to the radiator core, protect it by covering the radiator surface with cardboard.
  2. Lift the radiator and remove it from the radiator installation holes on the shroud panel.
  3. Move the radiator and condenser to the engine side.
  4. Remove the bolts which secure the condenser to the radiator.
    Fig 1: Condenser, Radiator And Bolts With Torque Specification
    G13713422Courtesy of MAZDA MOTORS CORP.
  5. Remove the radiator from below the engine compartment.
scientia non olet · About LEMON Manuals