LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Exterior Trim) >> Front Fender Molding Removal/Installation

Front Fender Molding Removal/Installation

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the front fender molding in the direction of the arrow shown in the figure and remove the hook from the front fender panel.
    G13179253Courtesy of MAZDA MOTORS CORP.
  2. Move the front fender molding in the direction of the arrow shown in the figure and remove the hook from the front fender panel.
    G13179254Courtesy of MAZDA MOTORS CORP.
  3. Remove the front fender molding in the direction of the arrow while detaching the tab and pin.
    G13179255Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals