LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Mechanical System (VIN Y)) >> Engine Mount Disassembly/Assembly >> No. 1 Engine Mount >> Notes

No. 1 Engine Mount: Notes

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front under cover No. 2. (See FRONT UNDER COVER No. 2 REMOVAL/INSTALLATION .)
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
Fig 1: No. 1 Engine Mount Components With Torque Specification
G13713028Courtesy of MAZDA MOTORS CORP.
PART DESCRIPTION

1 No. 1 engine mount bracket
(See NO. 1 ENGINE MOUNT INSTALLATION NOTE .)
2 No. 1 engine mount rubber
(See NO. 1 ENGINE MOUNT INSTALLATION NOTE .)
scientia non olet · About LEMON Manuals